This TUTORIAL works with ANY NOKIA PHONE unit
Before Doing, 1st Step: - BACK UP YOUR PHONE MEMORY (Contacts,
Calendar, Messages stored in Phone Memory, etc.)
- Phone memory will be deleted after firmware update.
- PINAKA IMPORTANTE sa lahat, DISABLE nyu muna
antivirus nyu during installation.
- Dapat successfully installed lahat without any error
Requirements (Download 1st the needed software, click
on the links attach):
1. NOKIA PHONE with FULL BATTERY.
2. Compatibe Nokia USB cable.
3. Nokia PC Suite (Version 7.1) link: www.mediafire.com/file/uixd3jnn5jg/Nokia_PC_Suite_eng_us_web.exe
4.Phoenix_Service_Software_ 2010.08.004.41526 link: www.4shared.com/get/m1lCGB40/Phoenix_Service_Software_20100.html
5. Latest Firmware from Blue Nokia. Link: www.blue-nokia.com/index02.html
(On Blue Nokia website (upper right screen) choose
phonetype)
Download the compatible at syempre latest firmware
version for your phone.
STEP 1. 1. Install Nokia PC Suite Vesion 7.1
STEP 2: 1. Turn off your cp --> remove battery --> look where
your cp was manufactured --> note also the RM version
& the 7 digit product code
(Ex. Made in China, RM-346, Product code - 0576672)
Remeber, isulat po natin yan.
Para iwas error.
2. Turn on your cp. Check the firmware installed -->
dial *#0000# (write all the information to be use in the
next steps).
3. Install all the needed application in your computer.
(NOTE Again! Dapat Naka Dis-able lahat ng antivirus, mas maganda kung e-kill or End process.)
4. Connect phone with your USB cable.
5. Select PC suite mode on the phone choices.
6. Dapat connected ka rin sa Nokia PC Suite mu, that
means na recognize ang phone mu, like this..
7. Open Phoenix
8. Pag open nya, automatic ma de-detect na nya ang
phone na nakakabit,RM version, Cable used, Phone unit,
etc..
9. Then Chosse mu na lang sa connections sa itaas, like
this...
10. Click File > Open Product..
11. Then Click File > Scan product...
12. Then pagka tapos mag scan, Click Flashing >
Firmware Update
13. Next, pili ng product code kung hindi automatic na
na-detect..
14. Then Finally, Click Refurbish!
15. Flashing na po cya.. DAPAT po, wag galawin ang phone, cable at phoenix application in this step. Watch Mode lang po tayu sa step na ito, mga 8 to 10 minutes po ang proccess..
Para walang problema. Natural lang na ma disconnect
cya sa Nokia PC suite, wag ninyu na lang pansinin. Wait
until matapos at lumabas yung Successfully!
Paki sunod ng maayos sa Screenshot ku.
16. Successfully, Tapos na po ang pag update ng
firmware mu.
Credit goes to nadlerzâ
